• img1
  • img2
  • img3

+86-510-83233269

maojing@wuxiacp.com

Product Categories

Contact Us

Add: No.8 Huicheng Avenue, Xizhang Village, Qianqiao Town, Wuxi City, Jiangsu, China

Contact: Daisy Mao

Tel: +86-510-83233269

Fax: +86-510-83233699

E-mail: maojing@wuxiacp.com

Use of PVC granules
Wuxi Qianqiao Strip Steel Co.,Ltd | Updated: Jun 13, 2017

PVC shrinkage Rate is very low, generally 0.2.

1, injection molding process conditions, drying treatment: usually do not need drying treatment.

2, melting temperature: 185 Mold Temperature: 20

3, injection pressure: can be large to 1500bar pressure: can be large to 1000bar injection speed: In order to avoid material degradation, generally with a considerable injection speed.

4, Runner and gate: All regular gate can be used. If a smaller part is machined, use a needle-shaped gate or submerged gate, and for thicker parts, use a fan gate. The minimum diameter of the needle-shaped gate or submerged gate should be 1mm, and the thickness of the fan gate should not be less than 1mm.

5, typical use: water supply pipelines, household pipelines, housing wall panels, commercial machinery shell, electronic products packaging, medical equipment, food packaging.


Contact Us
Wuxi Qianqiao Strip Steel Co.,Ltd

Address: No.8 Huicheng Avenue, Xizhang Village, Qianqiao Town, Wuxi City, Jiangsu, China

Tel: +86-510-83233269

Fax: +86-510-83233699

E-mail: maojing@wuxiacp.com

Copyright © Wuxi Qianqiao Strip Steel Co.,Ltd All Rights Reserved.
foottop